The Mountz CLD55 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLD series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 121 to 357 Ftlbs(165-486Nm), 3/4" SqDr., RPM=48, Spline adapter diameter=41MM, Wt=15lb. Each tool is shipped witha torque reaction foot and a air flow chart.  PN 210572

The Mountz CLD85 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLD series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 255 to 660 Ftlbs(305-895Nm), 3/4" SqDr., RPM=25, Spline adapter diameter=41MM, Wt=18lb. Each tool is shipped witha torque reaction foot and a air flow chart.  PN 210573

The Mountz CLD85 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLD series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 255 to 660 Ftlbs(305-895Nm), 1" SqDr., RPM=25, Spline adapter diameter=54MM, Wt=18lb. Each tool is shipped witha torque reaction foot and a air flow chart.  PN 210574

The Mountz CLD105 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLD series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 270 to 796 Ftlbs(365-1080Nm), 1" SqDr., RPM=15, Spline adapter diameter=54MM, Wt=18lb. Each tool is shipped witha torque reaction foot and a air flow chart.  PN 210575

The Mountz CLD125 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLD series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 332 to 970 Ftlbs(450-1315Nm), 1" SqDr., RPM=12, Spline adapter diameter=54MM, Wt=18lb. Each tool is shipped witha torque reaction foot and a air flow chart.  PN 210576

The Mountz CLD155 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLD series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 435 to 1275 Ftlbs(590-1730Nm), 1" SqDr., RPM=10, Spline adapter diameter=54MM, Wt=18lb. Each tool is shipped witha torque reaction foot and a air flow chart.  PN 210577

The Mountz CLD225 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLD series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 671 to 1970 Ftlbs(910-2670Nm), 1" SqDr., RPM=8, Spline adapter diameter=54MM, Wt=18lb. Each tool is shipped witha torque reaction foot and a air flow chart.  PN 210571

The Mountz CLD280 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLD series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 870 to 2552 Ftlbs(1180-3460Nm), 1" SqDr., RPM=6.5, Spline adapter diameter=54MM, Wt=20lb. Each tool is shipped witha torque reaction foot and a air flow chart.  PN 210578

The Mountz CLD380 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLD series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 1100 to 3230 Ftlbs(1490-4380Nm), 1.5" SqDr., RPM=6.5, Spline adapter diameter=72MM, Wt=25lb. Each tool is shipped witha torque reaction foot and a air flow chart.  PN 210579

The Mountz CLD580 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLD series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 1534 to4510 Ftlbs(2080-6115Nm), 1.5" SqDr., RPM=2.5, Spline adapter diameter=72MM, Wt=35lb. Each tool is shipped witha torque reaction foot and a air flow chart.  PN 210580

The Mountz CLD780 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLD series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 1925  to 5660  Ftlbs(2160-7675Nm), 1.5" SqDr., RPM=1, Spline adapter diameter=72MM, Wt=42lb. Each tool is shipped witha torque reaction foot and a air flow chart.  PN 210581

The Mountz CLD980 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLD series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 2810  to 8257  Ftlbs(3810-11195 Nm), 1.5" SqDr., RPM=6.5, Spline adapter diameter=91MM, Wt=55lb. Each tool is shipped witha torque reaction foot and a air flow chart.  PN 210582

The Mountz CLS15 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLS series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 44 to 162 Ftlbs(60-220Nm),1/2" SqDr., RPM=60, Spline adapter diameter=41MM, Wt=13lb. Single speed motor.  Each tool is shipped witha torque reaction foot and a air flow chart.  PN 213030

The Mountz CLS15 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLS series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 44 to 162 Ftlbs(60-220Nm), 3/4" SqDr., RPM=60, Spline adapter diameter=41MM, Wt=13lb. Single speed motor.  Each tool is shipped witha torque reaction foot and a air flow chart.  PN 213031

The Mountz CLS25 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLS series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 70 to 206 Ftlbs(95-280Nm), 1/2" SqDr., RPM=38, Spline adapter diameter=41MM, Wt=14.3lb. Single speed motor.  Each tool is shipped witha torque reaction foot and a air flow chart.  PN 213032

The Mountz CLS25 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLS series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 70 to 206 Ftlbs(95-280Nm), 3/4" SqDr., RPM=38, Spline adapter diameter=41MM, Wt=14.3lb. Single speed motor.  Each tool is shipped witha torque reaction foot and a air flow chart.  PN 213033

The Mountz CLS35 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLS series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 99 to 287 Ftlbs(135-287Nm), 3/4" SqDr., RPM=34, Spline adapter diameter=41MM, Wt=14.3lb. Single speed motor.  Each tool is shipped witha torque reaction foot and a air flow chart.  PN 213034

The Mountz CLS45 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLS series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 121 to 357 Ftlbs(165-485Nm), 3/4" SqDr., RPM=27, Spline adapter diameter=41MM, Wt=14.3lb. Single speed motor.  Each tool is shipped witha torque reaction foot and a air flow chart.  PN 213035

The Mountz CLS75 pneumatic torque multiplier provides safe and efficient torque for precise tightening and loosening of heavy duty fasteners.  The torque multiplier shuts-off automatically when the predetermined torque is achieved.  This control is achieved by the Mountz LCU-2(Lubro Control Unit- PN 061429 in this section) which provides consistent lubricated air pressure control to the tool. The CLS series pneumatic torque multipliers provide faster, and smoother torque than a hydraulic tool.  It is less expensive to operate and eliminates possible damages that occur when using an impact tool on heavy duty fasteners.  Torque range is from 222 to 660 Ftlbs(305-805Nm), 3/4" SqDr., RPM=19, Spline adapter diameter=41MM, Wt=14.3lb. Single speed motor.  Each tool is shipped witha torque reaction foot and a air flow chart.  PN 213036