Click on images for complete product details.
We carry the full line of Simonds hand held pneumatic cutting tools, hand held pneumatic bending tools, and hand held pneumatic crimping tools. Custom hand held cutting, bending and crimping heads for PC board and plastics manufacturing applications. Air-powered cut and bend tool cuts components on P.C. boards 1/16” above the surface and bends them over tight to the board !!. Contact us today for special applications.
SP-01P Squeeze-Eze™ Power Pack This tool can develop 575 lbs. of force @ 80 psi and is designed to be used with the jaw sets listed below. The tool is small (51/2” long x 1 1/2” diameter), lightweight (11 oz) and can be operated at air pressures of 60- 100 psi. A built in adjusting screw controls the opening of the jaw. All power packs sold less jaws.
SP-02P Squeeze-Eze™ Power Pack This tool can develop 850 lbs. of force @ 80 psi and is designed to be used with the jaw sets listed below. The tool is small (51/2” long x 1 3/4” diameter), lightweight (13 oz) and can be operated at air pressures of 60- 100 psi. A built in adjusting screw controls the opening of the jaw. All power packs sold less jaws.
SP-01PF Squeeze-Eze™ Power Pack with foot operated option. This tool can develop 575 lbs. of force @ 80 psi and is designed to be used with the jaw sets listed below. The tool is small (51/2” long x 1 1/2” diameter), lightweight (11 oz) and can be operated at air pressures of 60- 100 psi. A built in adjusting screw controls the opening of the jaw. All power packs sold less jaws.
SP-02PF Squeeze-Eze™ Power Pack with foot operated option. This tool can develop 850 lbs. of force @ 80 psi and is designed to be used with the jaw sets listed below. The tool is small (51/2” long x 1 3/4” diameter), lightweight (13 oz) and can be operated at air pressures of 60- 100 psi. A built in adjusting screw controls the opening of the jaw. All power packs sold less jaws.
Simonds CD-1 Cutting. Max soft wire=0.06"-(1.52mm), angle=45 deg., Lenght of cut=0.43"(11mm), Max tip opening=0.20(5.08mm) PN CD-1. For use with SP-01P, SP02P power packs.
Simonds CD-3 Cutting. Max wire=0.05"-(1.2mm), angle=45 deg., Lenght of cut=0.83"(21mm), Max tip opening=0.30(7.63mm) PN CD-3. For use with Simonds SP-01P, SP02P power packs.
Simonds PGC-2CH Cutting. Plastic only, Type cut=Flush, angle=straight cut, Lenght of cut=1"(25mm), Max tip opening=0.44(11.18mm) PN PGC-2CH . For use with Simonds SP-01P, SP02P power packs.
Simonds
#FS-1CH - SP Series Case Hardened Filament Shear Jaws for Cutting Fine Wire, Nickel Ribbon or Soft Wire up to .13
FS-1CH - SP Series Case Hardened Filament Shear Jaws for Cutting Fine Wire, Nickel Ribbon or Soft Wire up to .13
The Simonds CD-3CH are SP series dyke type cutter jaws with a 15° angled head and semi-flush cut for .05" wire.
Simonds CD-3CH Features:
The Simonds MSJ-1 are MSP series blank jaws, machinable to custom design or used as holding pliers with .16" jaw opening.
The Simonds CD-31 are SP series dyke type cutter jaws with a 15° angled head and flush cut for .05" soft wire.
Simonds CD-31 Features: