Delta Regis Tool stands are recommended to protect your investment and decrease clutter on your workbench. The DR90-30001 tool stand will support a maximum of 10 lbs (4.5 kg). Combined with the appropriate tool balancer (not included), the DR90-30001 will keep your screwdriver at the ready over the work surface. Aluminum construction Supports up to 10 lbs (4.5 kg) Height adjustable to 44 in (110 cm) Sliding tool hanger for horizontal motion Reach to 24 in (60 cm) Arm pivots 180 degrees Add a second a

The ERGO-12 (12Nm max torque)  Telescopic Reaction Arm is used to absorb and transfer the reaction force generated at the screwdriver during fastening, without having a significant effect on freedom of movement, thereby reducing operator fatigue. Through the use of carbon-fiber tubes, the arm is extremely tough while being light at the same time. With the universal mounting adapter, the ERGO-12 is capable of being mounted problem-free in most work areas. Solidly constructed rotation and swivel joints. The universal adapter allows for easy mounting in most work environments. Telescopic carbon-fiber arm. The tubes have been polished for a precision fit and are guided in low wear polymer bushings. Sturdy tool holder accepts tool diameters of 26 to 55 mm. Optimize tool mounting by selecting the aluminum torque lock sleeve that corresponds to your model of Delta Regis Electric Screwdriver. For optimal installation, use the Telescopic Reaction Arm in conjunction with a DR90-30001 Tool Stand and a DR90-10103 Tool Balancer. PN ERGO-12-L-HZ

The ERGO-30 (30Nm max torque)  Telescopic Reaction Arm is used to absorb and transfer the reaction force generated at the screwdriver during fastening, without having a significant effect on freedom of movement, thereby reducing operator fatigue. Through the use of carbon-fiber tubes, the arm is extremely tough while being light at the same time. With the universal mounting adapter, the ERGO-30 is capable of being mounted problem-free in most work areas. Solidly constructed rotation and swivel joints. The universal adapter allows for easy mounting in most work environments. Telescopic carbon-fiber arm. The tubes have been polished for a precision fit and are guided in low wear polymer bushings. Sturdy tool holder accepts tool diameters of 26 to 55 mm. Optimize tool mounting by selecting the aluminum torque lock sleeve that corresponds to your model of Delta Regis Electric Screwdriver. For optimal installation, use the Telescopic Reaction Arm in conjunction with a DR90-30001 Tool Stand and a DR90-10103 Tool Balancer. PN ERGO-30-L-HZ

Improve your electric or pneumatic screwdriver's torque repeatability. Fixing the tool in a precision arm results in consistent tool position and the same amount of grip force on the tool for every cycle, minimizing operator induced variables. The ERGO-25 arm also reacts the torque of the tool and balances its weight, reducing operator repetitive strain injuries. The parallel arm design maintains the output spindle of the screwdriver perpendicular to the work surface at all times. designed to hold screwdrivers and tappers all pivot points use ball and needle bearings for smooth travel tight machining tolerances provide precise movement tool balanced by pneumatic cylinder (compressed air req'd) adjustable air pressure regulator varies lifting force non-return valve protects from sudden dropping appealing design with anodized aluminum finish Maximum reaction torque is 25 Nm (18.5 ft-lb) Capacity: Max Tool Weight - 2.0kg (4.4lb) Travel: Vertical Stroke - 35cm (13.7in) Dimensions: Height - 58cm (22.8in), Work Radius - 85cm (33.5in) We

ight: 7.2kg (16lb)

Torque Lock Sleeve Model Number Fits Screwdriver Model DR80-10130 ESL302(P)/329(P) DR80-10131 ESL327(P)/328(P)/501/502/503 DR80-10132 ESL500 DR80-10133 ESL310/310S/311/312 DR80-10134 ESL300(P)/301(P)/323(P)/324(P) PNDR80  NOTE: PLease specify tool model when ordering

Angle Head Attachment, ESL302/327/328/329/383E-385E/628/629  Convert your in-line screwdriver into an angle driver for access to fasteners in tight areas. The angle head attachment installs in place of the tool's standard torque adjusting nut. Once the torque has been set, angle head position can be indexed relative to the tool's grip to allow the operator to select the optimum position. Angle heads are available for lever start models only. Fits tool models: ESL302, (C)ESL327-328, ESL329, CESL339, ESL383E-385E, ESL628-629 PN DR80-10160A

Angle Head Attachment, ESL300/301/323/324/623/624 Convert your in-line screwdriver into an angle driver for access to fasteners in tight areas. The angle head attachment installs in place of the tool's standard torque adjusting nut. Once the torque has been set, angle head position can be indexed relative to the tool's grip to allow the operator to select the optimum position. Angle heads are available for lever start models only. Fits tool models: ESL300, ESL301, (C)ESL323-ESD, (C)ESL324-ESD, (C)ESL623-ESD, (C)ESL624-ESD PN DR8010161A

Delta Regis 32V/40 DC Electric Screwdrivers 10 ft (3m), 6-pin tool cable to connect from the screwdriver to the controller. Longer cables are available for applications that require the controller to be installed further away from the driver. Please ensure that adequate cable length is selected to avoid the tool cable being stressed during use. PN DR96-10018 

Delta Regis 32V/40 DC Electric Screwdrivers 20 ft (6m), 6-pin tool cable to connect from the screwdriver to the controller. Longer cables are available for applications that require the controller to be installed further away from the driver. Please ensure that adequate cable length is selected to avoid the tool cable being stressed during use. PN DR96-10020 

Delta Regis 32V/40 DC Electric Screwdrivers 30 ft (9m), 6-pin tool cable to connect from the screwdriver to the controller. Longer cables are available for applications that require the controller to be installed further away from the driver. Please ensure that adequate cable length is selected to avoid the tool cable being stressed during use. PN DR96-10030